Osmoslim 4" Pro Desalinate Seawater!

Q: What is seawater desalination?

Water is not in short supply on Earth, but it is overwhelmingly salty, making it unsuitable for consumption. Its salinity varies from about 6,000 ppm in the Baltic Sea to 41,000 ppm in the Red Sea. Desalination involves removing this salt to obtain fresh, potable water. The reverse osmosis used by this system passes water under pressure through a semi-permeable membrane: the water passes through it, while the salt and impurities are retained.

Q: What kind of water quality will I get?

With a water supply of 15,000 to 40,000 ppm (TDS), the produced water falls to around 500 ppm.

Q: Can it be installed on a boat?

Yes. Its stainless steel AISI 316 chassis is designed to withstand marine environments, and its 230 V / 50 Hz single-phase power supply is compatible with common electrical installations. For a particular vessel or fleet, contact us: we will study your project.

Q: How much seawater is needed to produce 400 liters of fresh water per hour?

The system recovers about 20 to 30 % of the water it receives. It must therefore be fed with 1,200 to 1,400 liters of seawater per hour; the rest is discharged in the form of brine.

Q: What pressure do we need at the entrance?

The water must be supplied at a pressure of 2 to 4 bar. The CAT high-pressure pump then takes over the task of increasing the pressure to 35 to 45 bar during production.

Q: What is the lifespan of membranes?

For the FilmTec SW30-4040 membranes, a replacement every year is recommended. Their actual lifespan depends on the quality of the seawater, use and maintenance: clean pre-filter and regular emptying of the CAT pump oil.

Q: Can the installation be monitored remotely?

Yes. The OC6100 controller, paired with the Econnect system, connects to the Internet: you can monitor and control the installation from a computer or smartphone, wherever you are.

Description

Professional Desalinator Sea Water

Slim 4″ Pro MO10000: seawater turns into fresh water

This high-pressure reverse osmosis system is designed for desalination of seawater up to 40,000 ppm, In a simple and effective way.

Up to 400 liters of fresh water per hour, without chemicals.

400 L/h

fresh water (260 to 400 L/h depending on salinity and temperature)

40,000 ppm

Maximum salinity at the entrance

~500 ppm

for the produced water

Stainless steel 316

chassis adapted to the marine environment

For whom?

Adapted to marine environments and coastal installations, It produces fresh water from seawater, without chemicals.

Sea waterCoastal installationsWithout chemicalsRemote supervisionDOM-TOM

Professional equipment

Equipped with a CAT Pumps high-pressure pump, by 3 FilmTec SW30-4040 membranes and of Ecosoft OC6100 controller with Econnect, which allows the installation to be monitored remotely from a computer or smartphone.

What you need

A seawater flow rate of 1,200 to 1,400 liters per hour, an inlet pressure of 2 to 4 bars and a diet 230 V single-phase (2.2 kW).

AirDrink is with you to study your installation.

Technical specifications

Features	Values
Type of osmoseur	Special high-pressure reverse osmosis seawater
Production of fresh water	Up to 400 liters/hour (260 to 400 L/h depending on salinity and temperature)
Maximum salinity of the incoming water	40,000 ppm
Quality of the produced water	About 500 ppm
Recovery rates	20 to 30 %
Required seawater flow	1,200 to 1,400 liters/hour
Water inlet pressure	2 to 4 bars
Service pressure	35 to 45 bars (55 bars max.)
Membranes	3 × FilmTec SW30-4040
High-pressure pumps	CAT Pumps
Prefiltration	Big Blue cartridge 20″ – 5 µm
Controller	Ecosoft OC6100 + Econnect
Power supply	230 Volts – 50 Hz single-phase
Power	2.2 kW
Chassis	AISI 316 stainless steel (marine environment)
Dimensions (H × L × P)	1630 × 800 × 550 mm
Weight	230 kg
Connections	Input G 1″ – produced water G ½″ – waste water G ½″
Without chemicals	Yes
Remote supervision (computer / smartphone)	Yes
Documentation in French	Yes

Frequently asked questions

What is seawater desalination?

There is no shortage of water on Earth, but it is mostly salty, making it unsuitable for consumption. Its salinity varies from approximately 6,000 ppm in the Baltic Sea to 41,000 ppm in the Red Sea. Desalination consists of removing this salt to obtain fresh, potable water.’reverse osmosis Used by this system, the water is passed under pressure through a semi-permeable membrane: the water passes through it, while the salt and impurities are retained.

What kind of water quality will I get?

With a source of drinking water 15,000 to 40,000 ppm (TDS), the produced water flows down to around 500 ppm.

What can the produced water be used for?

For drinking and cooking, for showering and laundry, but also for filling a swimming pool, watering a garden or feeding animals.

Can it be installed on a boat?

Yes. His stainless steel chassis AISI 316 is designed to withstand the marine environment, and its feeding monophase 230 V / 50 Hz It adapts to common electrical installations. For a particular ship or fleet, contact us: we will study your project.

How much seawater is needed to produce 400 liters of fresh water per hour?

The system recovers approximately 20 to 30 % of the water it receives. Therefore, it must be fed with 1,200 to 1,400 liters of seawater per hour ; The rest is discarded in the form of brine.

What pressure do we need at the entrance?

The water must arrive with a pressure of 2 to 4 bar. The CAT high-pressure pump then takes over to bring it up to 35 to 45 bar during production.

Does the system use chemical products?

No. The water is produced solely by high-pressure reverse osmosis, without any chemical additives. Regular maintenance of the sediment filter and membranes is sufficient to maintain all its performance.

What is the lifespan of membranes?

For the membranes FilmTec SW30-4040, A replacement every year is recommended. Their actual lifespan depends on the quality of the seawater, use and maintenance: a clean prefilter and regular emptying of the CAT pump oil.

Can the installation be monitored remotely?

Yes. The controller OC6100, associated with the system Econnect, You connect to the Internet: you follow and control the installation from a computer or smartphone, wherever you are.

The user’s manual and the Technical brochure In French, the MO10000 seawater osmoseur is sent to you upon simple request.

Your desalinator has arrived complete and ready to connect, mounted on its chassis:

CAT High-Pressure Pumps, which brings the seawater to 35–45 bars
3 FilmTec SW30-4040 membranes special sea water (included)
3 high pressure membrane tanks (1000 psi)
Ecosoft OC6100 controller with system Econnect for remote supervision (computer or smartphone)
Conductivity probe on the water produced, to continuously monitor its quality
Prefilter with cartridge Big Blue 20″ (5 µm)
Power supply solenoid valve
Vanes with a regulating tip
Frame made of AISI 316 stainless steel, adapted to the marine environment

The membranes are included: you don’t need to order anything else to get started.

Depending on the quality of your seawater, we can also recommend a reverse-flow washing filter upstream to extend the lifespan of the prefilter and membranes. Contact us to talk about it.

Slim 4" Osmosis Pro for Desalination of Seawater!